Visit MQI's new website!

Pumps - Power Team

P SERIES

P SERIES - Power Team Pumps

The Power Team P-Series hand pumps come in a variety of configurations to meet the requirements of your application.  Along with various oil capacities and flow rates, you can choose from the following options:

  • Singe-speed or Two-speed
  • Single-acting or double-acting
  • Steel or Aluminum
  • 10,000 psi (700 bar) or 21,750 psi (1500 bar)

View Catalog - P Series - US  UK  DE ‖ ES  FR


RPS SERIES

RPS SERIES - Power Team Pumps

Precision-matched cylinders and pump set for wide range of applications.

  • Four styles of cylinders to choose from.
  • Sets feature single or two-speed hydraulic hand pumps.
  • Cylinders of various tonnages with long, medium or short stroke.
  • Includes necessary fittings, couplers and six foot hoses.

View Catalog - RPS Series - US ‖ UK ‖ DE ‖ ES ‖ FR


PA6 SERIES

PA6 SERIES - Power Team Pumps

Compact design ensures that the Power Team PA6 series pump is lightweight and portable. The PA6 series consists of single-speed pumps designed to drive single-acting cylinders. The power unit of choice for major manufacturers of auto body, frame straighteners and other equipment. Operates at 40-100 psi (3-8 bar) shop air pressure at the pump, dBA 85 at 10,000 psi (700 bar). Serviceable pump motor is not a “throwaway”, providing economical repair. Permanently vented reservoir cap. Internal relief valve protects circuit components, air inlet filter protects motor.

View Catalog - PA6 Series - US  UK  DE ‖ ES  FR


PA6D SERIES

PA6D SERIES - Power Team Pumps

Compact, lightweight and portable the Power Team PA6D series pumps are single-speed pumps for driving double-acting cylinders. The PA6D series pumps operate at 40-100 psi (3-8 bar) shop air pressure at the pump. Designed with longevity in-mind the PA6D series feature internal relief valve protects circuit components, air inlet filter protects motor. Serviceable pump motor is not a “throw away”, providing economical repair. Permanently vented reservoir cap. dBA 85 at 10,000 psi (700 bar) for all PA6 pump.

View Catalog - PA6D Series - US  UK  DE ‖ ES  FR


PA9 SERIES

PA9 SERIES - Power Team Pumps

Ideal for powering single-acting cylinders and portable hydraulic tools, the Power Team PA9 series pumps are easier to operate than a hand pump, designed for efficiency. Built to be economical in service; the PA9 series is not a “throwaway” unit. Unique bladder design for all-position operation and storage. Operates on 40-120 psi (3-8 bar) shop air, at 20 cfm (570 l). Hard-coat anodized aluminum housing. Oil filler with integral safety relief minimizes chance of damage to reservoir bladder if overfilling occurs.

View Catalog - PA9 Series - US  UK  DE ‖ ES  FR


PA60 SERIES

PA60 SERIES - Power Team Pumps

A two-speed pump, the Power Team PA60 series pumps are designed for rapid oil delivery at low pressure to quickly advance cylinder or tool. Equipped with air pressure regulator, air filter and lubricator. Serviceable air motor for economical repair. Internal relief valve protects circuit components. Permanently vented reservoir cap.

View Catalog - PA60 Series - US  UK  DE ‖ ES  FR


PA50 SERIES

PA50 SERIES - Power Team Pumps

Focused on single-speed and low pressure the Power Team PA50 series pump outputs 3,200 PSI / 220 BAR, fitting serviceable requirements for air motor for economical repair. Integrated air inlet filter protects motor. The PA50 series also features a filter in outlet port protects against contaminated systems Assorted reservoirs to suit your application's requirements.

View Catalog - PA50 Series - US  UK  DE ‖ ES  FR


PA17 SERIES

PA17 SERIES - Power Team Pumps

Rotary-Style Air Motor.  Use where air is the preferred source of energy.  Two-speed operation for high speed cylinder advance.  Durable two gallon thermoplastic reservoir. (Metal reservoir conversion kits are available.)  Air motor capable of starting under full load.

View Catalog - PA17 Series - US  UK  DE ‖ ES  FR


PA46/PA55

PA46/PA55 - Power Team Pumps

Rotary-Style Air Motor.  Use where air is the preferred source of energy.  3 hp motor starting under full load.  Two-speed operation for rapid cylinder advance.  Models available with full remote control over advance and return, except PA554.  Tandem center valve holds the load when pump is shut-off.

View Catalog - PA45/PA55 Series - US  UK  DE ‖ ES  FR


PUA/PMA SERIES

PUA/PMA SERIES - Power Team Pumps

The Power Team PUA/PMA series pumps provide infinitely variable capacity and discharge pressure. Suitable for continuous start/stop applications Pumps oil, water, and other fluids Stainless steel pump and check valves standard Maintains pressure with minimal power consumption (Non-load holding) Usable in hazardous areas: per ATEX II, CAT. 2 GDcT5 Quiet operation Can operate on gases other than air Simple to install and maintain Compact, rugged design Only 15 psi (1 bar) air pressure required to start pump Requires flooded inlet Vertical mount.

View Catalog - PUA/PMA Series - US  UK  DE ‖ ES  FR


PB SERIES

PB SERIES - Power Team Pumps

Compact, Portable, Cordless Hydraulic Pump for MRO Applications.  Compact, Li-ion 18VDC, 9.0 Ah battery-powered pump provides extended run-time.  Two-stage, high-pressure hydraulic pump offers quick tool advancement in the first stage.  Extremely compact, lightweight with an ergonomic handle grip and transport strap to ease portability.  Self-contained, rubber bladder reservoir allows pump usage in most positions with an impressive capacity of 70 cu. in. usable.  Quiet, smooth-running, serviceable brushed 18VDC motor.  High-impact, fiberglass reinforced shroud protects your investment in the most demanding and harsh applications.  Interchangeable valve configuration accommodates a vast array of applications.  CSA rated for intermittent duty, CE compliant.

View Catalog - PB Series - US  UK  DE ‖ ES  FR

View Catalog - Maintenance Sets - US


PE10 SERIES

PE10 SERIES - Power Team Pumps

The 10 series Power Team hydraulic pumps are designed to have a maximum of 690 bar (10,000 psi) at a flow rate of 164 cc/min (10 cu. in/min). All Power Team pumps come fully assembled, and each with the ability to be valved for either single- or double acting cylinders. Designed to be compact can easily mobile, the power team 10 series includes a portable power source is included for hydraulic cylinders, and tools. The permanent magnet motor is strategically constructed to easily start under load, even with reduced voltage conditions. Battery-operated models have 8 foot (2,4 m) power cord with alligator clips to connect to any 12 volt battery, optional rechargeable battery pack with shoulder strap are alternatives for maximum portability. The Power Team 10 series pump typically delivers 15 minutes of continuous operation at 10,000 psi (700 bar) on a single battery. Built to withstand High-impact, shielded with a flame retardant construction.

View Catalog - PE10 Series - US  UK  DE ‖ ES  FR


PE17 SERIES

PE17 SERIES - Power Team Pumps

The Power Team 17 series pump is delibertly designed for maintenance and construction applications up to 55 Ton. For use with single-acting or double-acting cylinders at operating pressures to 10,000 psi (700 bar). For intermittent duty; starts under full load. Equipped with 1⁄2 hp (0,37 kW), 3,450 rpm, single-phase, thermal protected induction motor; 10 ft. remote control cord (PE172S has 25 ft. (7,6 m) cord) Low amperage draw; small generators and low amperage circuits can be used as power source. Extremely quiet noise level (67-81 dBA).

View Catalog - PE17 Series - US  UK  DE ‖ ES  FR


PE18 SERIES

PE18 SERIES - Power Team Pumps

Vanguard Jr. + Power Team 18 series pumps provide two-speed high performance in a light-weight, compact package. Designed to provide a gauge port and metal reservoir on all pump models. Equipped with a 1⁄2 hp (0,37 kW), 115 volt, 60/50 Hz single phase motor that starts under load, even at reduced voltage. Low amperage draw permits use with smaller generators and low amperage circuits. All pumps have a 10 foot (3 m) remote control. CSA rated for intermittent duty. Noise level of 85-90 dBA. For operating hydraulic crimping, cutting or other tools: No. PE184C - Allows you to alternately operate a spring-return cutting and/or crimping tool without disconnecting either tool. Select a port connection with a manual 4-way valve, start the pump with a remote control hand switch and extend the connected tool. When the hand switch is switched to off, the pump stops and the automatic valve opens, allowing the tool to return. In the center (neutral) position, a manual control valve holds the tool in position at the time valve is shifted.

View Catalog - PE18 Series - US  UK  DE ‖ ES  FR


PE21 SERIES

PE21 SERIES - Power Team Pumps

The 21 series Power Team pump and RD5513 cylinder used in a special press that produces pharmaceutical-grade extracts for herbal medicines. Totally enclosed, fan cooled induction motor: 1 hp (0,75 kW), 1,725 rpm, 60 Hz, single phase. Designed intentional for thermal overload protection. Remote control, with 10 foot (3,1 m) cord is standard on pumps with solenoid valves. Manual valve pumps have “Stop”, “Start” and “Run/Off/Pulse” switches. Pump controls are moisture and dust resistant. Motor drip cover with carrying handles and lifting lug. Low noise level of 70 dBA@ 10,000 psi (700 bar). In the event of electrical interruption, pump shuts off and will not start up until operator presses the pump start button. 24 volt control circuits on units with remote controls provide additional user/operator safety.

View Catalog - PE21 Series - US  UK  DE ‖ ES  FR


PED SERIES

PED SERIES - Power Team Pumps

Ideal for running multiple tools or cylinders from one power unit. Recommended for cylinders up to 75 tons. Two-speed pumps have the same low pressure and high pressure flows from both valves. Flows and pressures of each pump are independent. Delivers 300 cu. in./min. of oil at 100 psi (4,8 liter/min of oil at 7 bar) and 25 cu. in./min. at 10,000 psi (0,4 liter/min at 700 bar) from each pump. 1 1/2 hp, 110/115 volt, 60 Hz (1,12 kW, 220 volt, 50 Hz) induction motor, 10 foot (3,1 meter) remote control and 5 gallon (19 liter) steel reservoir. Models available for operating single-acting or double-acting cylinders. Each power unit contains two separate pumps and two separate valves allowing operator to control multiple processes with one power unit. Both pumps on each power unit are equipped with an externally adjustable pressure relief valve. Not recommended for frequent starting and stopping.

View Catalog - PED Series - US  UK  DE ‖ ES  FR


PE30 SERIES

PE30 SERIES - Power Team Pumps

The Power Team 30 series pump is intently ideal for maintenance and construction applications.  Operating both single-acting or double-acting cylinders. A dynamically built, Integral roll cage protects the 30 series pump from many forms of damage. 1 hp (0,75 kW), single phase, permanent magnet motor. High performance to weight ratio. Starts under full load even when voltage is reduced to 50% of nominal rating. Quit operations: 82 dBA @ 10,000 psi (700 bar) and 87 dBA @ 0 psi (0 bar). CSA rated for intermittent duty. Remote controls and/or solenoid valves feature 24 volt controls.

View Catalog - PE30 Series - US  UK  DE ‖ ES  FR


PE46 SERIES

PE46 SERIES - Power Team Pumps

The Power Team 46 series is best suited for under the roof maintenance and production applications. Equipped with two-speed high-performance pump, for use with single- or double-acting cylinders at operating pressures to 10,000 psi (700 bar) the 46 series pump is versitile. With a 1 1⁄2 hp (1.12 kW), 3,450 (2,875) rpm single-phase, 60 (50) Hz thermal protected induction motor that starts under full load. Noise level of 77-81 dBA. All equipped with a 10 foot (3,1 m) remote control except PE462S which has a 25 foot (7,6 m) remote control. 24 volt control circuit on all units with remote control. CSA rated for intermittent duty.

View Catalog - PE46 Series - US  UK  DE ‖ ES  FR


PE55 SERIES

PE55 SERIES - Power Team Pumps

A powerful multifaceted pump, the Power Team 55 pump excels at multiple applications. From heavy construction to concrete stressing this pump series is designed for intensity. With low voltage starting possible,  the 50/60 Hz universal motor; draws 25 amps at full load, and can start at reduced voltage. CSA rated for intermittent duty. 10 foot (3,1 m) remote motor control (except PE552S which has a 25 foot (7,6 m) remote motor and valve control). True unloading valve achieves greater pump efficiency, allowing higher flows at maximum pressure. Reservoirs available in sizes up to 10 gallons (38 liter). Lightweight and portable. Best weight-to-performance ratio of all Power Team pumps. “Assemble to Order” System: There are times when a custom pump is required. Power Team’s “Assemble to Order” system allows you to choose from a wide range of pre-engineered, off-the shelf components to build a customized pump to fit specific requirements. By selecting standard components you get a “customized” pump without “customized” prices. All pumps come fully assembled, add oil and ready for work.

View Catalog - PE55 Series - US  UK  DE ‖ ES  FR


PE60 SERIES

PE60 SERIES - Power Team Pumps

A compact lightweight pump, the Power Team 60 series is designed for rugged applications and low voltage starting. Experiencing a long, trouble-free life in the most demanding work environments, the 60 series is durable.. Powered by 1 1⁄8 hp, 115 volt, 60/50 Hz (0,84 kW, 220 volt, 60/50 Hz) single phase motor. Starts under load, even at the reduced voltages at construction sites. Optional fan-driven external oil cooler includes rollover guard. Insulated carrying handle. Integral 4" (102 mm) diameter fluid-filled pressure gauge with steel bezel complies with ASME B40.1 Grade A. 0 to 10,000 psi (0 to 700 bar) pressure range in 100 psi (7 bar) increments. Sealed 3⁄4 gallon (4,34 liter (usable) reservoir. Reservoir drain port is standard. Standard oil level sight gauge for accurate oil level monitoring. External spin-on filter removes contaminants from circulating oil to maximize pump, valve and cylinder/tool life.

View Catalog - PE60 Series - US  UK  DE ‖ ES  FR


PQ60 SERIES

PQ60 SERIES - Power Team Pumps

The Power Team PQ60 series pumps are designed specifically for heavy-duty, extended cycle operation. Integrating single- or double-acting cylinders the PQ60 series is versatile. Constructed for longevity by employing a metal shroud keeps dirt and moisture out of motor and electrical components. An electrical shut-down feature prevents unintentional restarting of motor following an electrical service interruption. Internal relief valve limits pressure to 10,000 psi (700 bar). External relief valve is adjustable from 1,000 to 10,000 psi (70 to 700 bar). The Power Team PQ60 pumps operate below maximum OSHA noise limitation (74-76 dBA). Start and operate under full load, even with voltage reduced by 10%.

View Catalog - PQ60 Series - US  UK  DE ‖ ES  FR


PQ120 SERIES

PQ120 SERIES - Power Team Pumps

The Power Team 120 series pump is exactingly designed for heavy duty, extended cycle operation up to 400 Ton. Built in grit, the series 120 pump can start and operate under full load, even with voltage reduced 10%. An electrical shut-down feature prevents unintentional restarting of motor following an electrical service interruption. Internal relief valve limits pressure to 10,000 psi (700 bar) and an external relief valve is adjustable from 1,000 to 10,000 psi (70 to 700 bar). Pump prewired at factory with a 3 hp, 460 volt, 60 Hz (2,24 kW, 380 volt, 50 Hz), 3 Phase motor. Other electrical configurations are available. 24 volt control circuits on units with remote controls for added user/operator safety. 3 hp (2,24 kW) 3 phase motor with thermal overload protection. Motor starter and heater element supplied as standard equipment; with an intentionally designed metal shroud to keep dirt and moisture out of motor and electrical components. Pumps operate below maximum OSHA noise limitation.

View Catalog - PQ120 Series - US  UK  DE ‖ ES  FR


PE400 SERIES

PE400 SERIES - Power Team Pumps

With high tonnage double-acting cylinders, the Power Team 400 series offers both single or multiple cylinder applications. Two-speed high output pump delivers up to 5 gpm (16 liter/min) of oil, with a low noise level of 73-80 dBA. Integral electrical shut-down feature prevents unintentional restarting of motor following an electrical service interruption. Over-current protection prevents damage to motor as a result of overheating. “Stop” and “Start” control buttons are 24 volt. PE4004 has a 4-way/3-position manual valve. The PE4004S has a 4- way/3-position solenoid valve with a 24 volt remote hand switch. External pressure relief valve is adjustable from 1,500 to 10,000 psi (100 to 700 bar). Heavy duty 4" (50,8 mm) diameter casters assure easy maneuvering. 20 gallon (3,927 cu. in. usable) / 75,7 liter (62,8 liter usable) reservoir has a low oil level sight gauge. Powered by a dual voltage 10 hp (7,46 kW), 3 phase, 1,725 (1,437) rpm motor. 3 phase motor has all the electrical components necessary to operate the pump.The customer has no hidden charges when making purchase. Deliver 1,200 cu. in./min. (16 liter/min) of oil @ 200 psi (15 bar), 420 cu. in./min. (5,6 liter/min) of oil @ 10,000 psi (700 bar).

View Catalog - PE400 Series - US  UK  DE ‖ ES  FR


MCS SERIES

MCS SERIES - Power Team Pumps

Power team synchronized lifting and lowering system, the MCS ( motion controller system ) series can be used in many hydraulic applications where load position is critical, requiring cylinder synchronization. Whether it is a bridge, a building or any kind of heavy load, with the SPX FLOW power team motion control system, lifting, lowering, pushing, pulling, tilting or positioning loads can be carried out automatically with a high degree of accuracy. The PLC-controlled system is a combination of digital actuation and digital control providing significant advantages such as time savings, repeatability, and extremely low internal stress in the object one is moving. The system also provides documentation for the movement performed.

View Catalog - MCS Series - US  UK  DE ‖ ES  FR


PE-NUT SERIES

PE-NUT SERIES - Power Team Pumps

Extremely durable yet lightweight and operable under low-line voltage conditions, the Power Team PE-NUT series pumps are constructed for challenging conditions. A 115V 5/8 hp (0,46 kW) universal electric motor (50/60 cycle), employing a two-stage pump for efficiency and designed for use with spring-returned remote tools. The PE-NUT series pumps also feature high-pressure safety relief valve, remote hand control with 10-foot (3,1 meter) cord, and a pressure matched quick-coupler supplied. The PE-NUT series uniquely utilizes intermittent duty, piston-type high-pressure pump supercharged by a low-pressure pump. CAUTION: DESIGNED FOR CRIMPING APPLICATION ONLY! This system should not be used for lifting.

View Catalog - PE-NUT Series - US  UK  DE ‖ ES  FR


PG120 SERIES

PG120 SERIES - Power Team Pumps

Two-stage pump for crimping applications

PG1203-CP

  • 6 hp Briggs & Stratton engine.
  • Manual control valve.
  • High-pressure safety relief valve.
  • Protective roll cage.
  • For use with single acting tools.

PG1203/4S-CP

  • 5.5 hp Honda OHV-type engine.
  • Solenoid valve with remote hand control with 10’ cord.
  • Two-stage pump for rapid advance.
  • High-pressure safety relief valve.
  • Protective roll cage.
  • For use with either single or double-acting tools.

View Catalog - PG120 Series - US  UK  DE ‖ ES  FR


PG30/PG55 SERIES

PG30/PG55 SERIES - Power Team Pumps

Gasoline power ideal for remote locations.  A logical choice at work sites where electricity or compressed air are unavailable. For single or double-acting cylinders at operating pressures up to 10,000 psi.  All gasoline engine/hydraulic pumps feature Posi-Check® valve to guard against pressure loss when valve is shifted from “advance” to “hold.”

PG303 and PG304 (Up to 75 Ton)

  • Powered by a 4-cycle, 2 hp Honda engine giving it the lowest weight to horsepower ratio of all gasoline driven pumps.
  • Has an aluminum reservoir with 375 cu. in. of usable oil.
  • PG30 series pumps are equipped with roll cages to protect pump from damage.
  • PG303 is for single-acting cylinders, has a 9520 valve with separate internal return line which allows oil from running pump to return to reservoir, independently of cylinder return oil, when valve is in “return” position.
  • PG304 is for double-acting cylinders, has a 9506 4-way (tandem center) valve.

PG553 and PG554 (Up to 150 Ton)

  • 6 hp Intek “Diamond Edge” 4-cycle, by Briggs & Stratton.
  • 5 gallon reservoir.
  • PG553 has a 9520 3-way valve for single-acting cylinders.
  • PG554 has a 9506 4-way valve for double-acting cylinders.
  • Optional roll cage available.

View Catalog - PG30/PG55 Series - US  UK  DE ‖ ES  FR


PG120/PG420 SERIES

PG120/PG420 SERIES - Power Team Pumps

Two-speed high-performance pumps ideal for construction, structure moving and rigging applications.

  • A logical choice at work sites where electricity or compressed air are unavailable. For single or double-acting cylinders at operating pressures to 10,000 psi.
  • All gasoline engine/hydraulic pumps feature Posi-Check® valve to guard against pressure loss when valve is shifted from “advance” to “hold.”
  • PG1200 Series pumps powered by a Honda 4-cycle, 5.5 hp engine with automatic decompression and electronic ignition. Deliver over 0.5 gallon (130 cu. in.) of oil per minute at 10,000 psi.
  • A 5 gallon reservoir means adequate capacity for multi-cylinder  applications. Dual element air cleaner protects engine from dusty environments.
  • Heavy-duty “roll cage” provides pick-up points for lifting.  Horizontal bars on PG1203, PG1204 and PG1204S protect unit, provide hand holds for carrying.
  • Rubber anti-skid insulation on bottom of reservoir resists skidding and dampens vibration. PG1200M-4 and PG1200M-4D include a pump cart with 12” wheels.
  • Adjustable external pressure regulator.
  • CSA rated for intermittent duty.

View Catalog - PG120/PG420 Series - US  UK  ES  FR


HB SERIES

HB SERIES - Power Team Pumps

The Power Team HB series is purposefully constructed to convert low-pressure portable hydraulic pumps or on-board hydraulic systems, into high pressure power sources. HB series applications include utilities, railroads, construction, riggers and others. This product operates single or double-acting cylinders, jacks, and tools such as crimpers, spreaders, cable cutters, or tire tools. Version for use with double-acting torque wrenches available. May be used to operate two separate, single-acting tools (with integral valves) independently, without need for additional manifold. Control valve included. Other Power Team valves available as an option to suit your specific application, if needed; consult factory. Compact and rugged for use inside a utility vehicle aerial bucket or stowing in a vehicle. No reservoir level to maintain; uses low pressure system as oil supply. Has 3⁄8" NPTF ports; compatible with standard fittings for low and high pressure systems.

View Catalog - HB Series - US  UK  DE ‖ ES  FR


INTENSFIERS

INTENSFIERS - Power Team Pumps

Portable two-speed pump operated in any position (open or closed-center) providing pressures up to 10,000 psi for the operation of high-pressure tools.

Features

  • Designed to intensify low-pressure system to 4,000-10,000 psi
  • Two-speed pump for rapid ram advance
  • Designed to operate with external hydraulic oil systems
  • All position mounting operation
  • Design permits operation on open or closed-center system
  • Dual output pressure port selector valves (DUP models)
  • High-pressure safety relief valve
  • Carrying handle for portability
  • Pressure matched quick-couplers supplied

 The 25 Series Boosters represent an innovative concept, providing pressures up to 10,000 psi for the operation of high-pressure tools.

Oil from an external source, such as a bucket truck or tractor, is intensified to 10,000 psi maximum. Low pressure from the source is bypassed through the booster for rapid ram advance.

These compact, lightweight boosters do not have reservoirs. The units can be operated in any position on either open- or closed-center (accumulator) hydraulic systems.


ATO SERIES

ATO SERIES - Power Team Pumps

Order a "Custom Built" Hydraulic Pump

“Assemble to Order” means you can choose a basic pump with gas, air or electric motor. Then select the proper valve, gauge, pressure control, motor control and reservoir. You get a two-stage pump that gives high oil volume for fast cylinder approach (and return with double-acting cylinders) in the first stage and high pressure in the second stage.

1-1/8 HP Universal Motor.  These motors start under full load and are suitable for operation up to 5,000 or 10,000 psi. The motor is 1-1/8 hp, 12,000 rpm, 115 or 230VAC (specify), 50/60 cycle AC single-phase (25 amp draw at 115VAC). With proper valve they can be used with single or double-acting cylinders. NOTE: Remote control available.

1-1/2 HP Jet Motor, Single & Three-Phase.  Feature low noise level, moderate speed for long service and are ideal for fixed applications. Motor is 1-1/2 hp, 3,450 rpm, 115 or 230VAC, 50 or 60 cycle (specify), AC single-phase with thermal overload switch. Can be used with single or double-acting cylinders and equipped with remote control. Also available in 230/460VAC, three-phase (specify).  NOTE: These do not start under full load unless valve is in “neutral” (requires open or tandem center valve) and are not recommended for frequent starting and stopping.

3 HP Jet Motor, Three-Phase.  Gives low noise level and long life due to its moderate operating speed. Ideal for fixed installations. Consists of basic 10,000 psi pump, jet pump motor: 3 hp, 3,450 rpm, 230/460VAC, 60 or 50 cycle (specify). AC three-phase, with thermal overload switch. Equipped with internal and external relief valve. Will start under load.

3 HP Air Motor.  This pump is ideal for use where electricity is unavailable
or cannot be used. The 5,000 or 10,000 psi pump has a 3 hp air-driven motor at 3,000 rpm (optimum performance based on 80 psi air pressure and 50 cfm at the pump). You can drive single or double-acting cylinders with the correct valve.  NOTE: 80 psi air supply required to start under full load.

Gasoline Engine.  This version is perfect when electricity and air are
unavailable. It is capable of continuous operation at full pressure. Consists of basic 10,000 psi pump, 4-cycle Briggs & Stratton “Diamond Edge” gasoline engine, developing 6 hp. As with all these pumps, this unit can be valved for use with either single or double-acting cylinders.

View Catalog - ATO Series - US  UK  DE ‖ ES  FR

Copyright © 2014 MQI Company. All Rights Reserved.

Tel: +886 2 2283 1995|Fax: +886 2 2283 1993|E-mail: [email protected]